Delivery throughout the EU

Aquarium Light Calculator: PAR Estimate & Light Finder

Enter your tank size and the plants you want to grow. The calculator estimates how much light (PAR) each LED in our range delivers to your substrate, and shows which ones fit your tank and your plants.

How the estimate works

PAR at the substrate depends on how much light a lamp emits, how far it travels and how large an area it is spread over. The calculator takes each light's rated lumens, the footprint of your tank and the distance from the light to the substrate (water depth plus a typical mounting height), and turns that into an approximate PAR value. RGB lights get a small bonus because red and blue LEDs give plants more usable light per lumen than white LEDs.

What it cannot know: the exact optics of each light, how high you actually mount it, whether your water is tinted and how much the glass reflects. Treat the result as a range, not a reading. It is also an average for the whole tank: the centre under the light is brighter and the front corners darker.

How to read the result

  • Good match: the light reaches your target with headroom. In a new tank start below the suggested percentage and raise it over a few weeks.
  • Enough at full power: it works, but there is no reserve if you later move to more demanding plants.
  • Much stronger than needed: usable, since all these lights dim, but you pay for output you will not use, and a day at 100% by mistake invites algae.
  • Too weak: it will not reach your target at this depth and footprint.

More light needs more CO₂ and nutrients. Read the PAR guide and the CO₂ guide, and check fertiliser dosing in the planted aquarium calculator. All lights: aquarium lighting.

Free to use and link to. Not sure which light to pick? Ask us.